Convert gauss to mt
1 gauss equals 0.1 milliteslas. Enter a value below to convert instantly.
Need the other direction? Convert millitesla to gauss →
Formula
Multiply the number of gauss by 0.1 to get milliteslas.
Step by step
- Start with 1 G.
- Multiply by the conversion factor 0.1.
- 1 × 0.1 = 0.1 mT.
Gauss to Milliteslas conversion table
| Gauss (G) | Milliteslas (mT) |
|---|---|
| 1 | 0.1 |
| 2 | 0.2 |
| 5 | 0.5 |
| 10 | 1 |
| 20 | 2 |
| 50 | 5 |
| 100 | 10 |
Convert Gauss to other magnetic flux density units
1 G expressed in every other magnetic flux density unit on this site.
- Tesla T 0.0001
- Kilotesla kT 1e-7
- Millitesla mT 0.1
- Microtesla µT 100
- Nanotesla nT 100,000
- Picotesla pT 100,000,000
- Gauss G 1
- Kilogauss kG 0.001
- Milligauss mG 1,000
- Microgauss µG 1,000,000
- Weber per Square Meter Wb/m² 0.0001
- Weber per Square Centimeter Wb/cm² 1e-8
- Maxwell per Square Centimeter Mx/cm² 1
- Gamma γ 100,000
- Weber per Square Inch Wb/in² 6.4516e-8
- Maxwell per Square Inch Mx/in² 6.4516
About the gauss
The gauss (G) is a Other unit of magnetic flux density. The CGS unit still used in magnet specifications; Earth's field is roughly 0.5 G.
About the millitesla
The millitesla (mT) is a SI unit of magnetic flux density.
Where this conversion is used
Converting gauss to milliteslas comes up when magnet selection, MRI, motor design, and geomagnetic surveys. Earth's field is roughly half a gauss, so most everyday magnet readings sit in the gauss-to-kilogauss range rather than in tesla.
Related conversions
Frequently asked questions
How many milliteslas are in a gauss?
One gauss equals 0.1 milliteslas.
How do you convert gauss to milliteslas?
Multiply the number of gauss by 0.1 to get milliteslas.
What is 1 millitesla in gauss?
One millitesla equals 10 gauss.
When would I convert gauss to milliteslas?
This conversion is common when magnet selection, MRI, motor design, and geomagnetic surveys.
Conversion factors are based on internationally agreed unit definitions. See our methodology and sources for details on how these values are verified.